Living areas
Big walls show every roller mark and every patch. We fill nail holes and dings, sand them flush, spot prime, then roll even finish coats so window light does not pick out the repairs.
Smooth walls, clean cut lines and a crew that masks, patches and primes before any finish color goes on. Palafox Construction paints homes across the Grand Valley and the Western Slope.
Monday to Friday, 8 am to 6 pm
Interior painting with Palafox Construction covers every painted surface inside your home: walls, ceilings, trim, doors and the first coats on new drywall. We paint occupied homes and empty remodels in Fruita, Grand Junction and Clifton, from 1970s ranch houses with textured ceilings to new subdivision builds on Fruita's north and northeast side. Most jobs start the same way. We walk the rooms, look at each surface, and sort out what needs patching, sanding or priming before anything gets painted. Then we mask what stays clean, roll or spray the coats that suit each room, and cut the lines by hand where two colors meet. Because the same crew hangs and finishes drywall, we know what a joint, a texture patch or a skim coat needs underneath the paint. Here is how the work breaks down room by room.
Big walls show every roller mark and every patch. We fill nail holes and dings, sand them flush, spot prime, then roll even finish coats so window light does not pick out the repairs.
Steam, grease and splashes are hard on paint. We clean and degrease first, prime glossy or patched spots, and use finishes made for rooms that get wet and wiped down.
Ceilings are the hardest surface to keep even. We cover the room, work in sections and hold a wet edge so lap lines do not show in the afternoon sun, whether the ceiling is flat or textured.
Baseboards, casings, doors and arched openings get sanded, caulked and finished for a smooth, hard surface. Edges next to wall color are cut by hand so the line stays crisp.
Fresh drywall soaks up paint unevenly, so it gets primed before color. Hanging, taping, texture and paint can stay with one crew, from the first sheet to the last coat.
See our drywall workRolling paint is the quick part. What you live with for years is what happened before the lid came off. This is the checklist every room gets.
Floors are covered, trim and fixtures are taped, and rooms are sealed with plastic when we spray, so overspray stays off what you are keeping.
Nail pops, dings, cracks and old anchor holes are filled, sanded flush and spot primed, so repairs disappear under the finish coat.
Taped and mudded drywall gets a coat of primer sealer first, so joints and paper take the topcoat evenly and the sheen does not flash.
Where wall meets ceiling, trim or a second color, the line is cut by hand with a brush, steady and straight, not left to tape alone.
Fruita sits at about 4,500 feet and gets around 9 inches of rain a year. In that dry air, paint skins over fast, and a wall that is cut and rolled in pieces can show lap marks and uneven sheen. We work in smaller sections, keep a wet edge and plan coats around the room, the sun and the season.
The same dryness is why new drywall needs primer. Joint compound and paper drink paint at different rates, and bare drywall left unsealed gives you patchy, dull spots that show when afternoon light rakes across the wall. Valley homes also move with seasonal swings and shifting clay soils, so we check for nail pops and hairline cracks before we paint over them.
It depends on the size of the rooms, how much patching and sanding they need, ceiling height, the number of coats and how much trim and door work is included. New drywall adds a priming step. We look at the rooms and give you a written quote based on what the surfaces actually need, rather than a flat number.
Yes, once the joint compound is fully dry and sanded. New drywall gets primed first so the mud, tape and paper all absorb the topcoat the same way. Skipping primer is the main reason fresh walls look patchy. Since the same crew hangs and finishes drywall, hand-off between trades is simple.
We cover floors, tape off trim and fixtures, and seal off rooms with plastic when we spray. Furniture is easiest to handle when moved out or to the middle of the room and covered. When you request a quote, mention what is hard to move and we will plan around it before the work starts.
It depends on the room and the prep. Dry Western Slope air means coats dry quickly, but patching, sanding, priming and cutting in all take real time, and ceilings and trim take longer than open walls. We talk through scope and a realistic schedule when we quote, so you know what to expect.
Yes. We paint interiors in Fruita, Grand Junction, Clifton, Montrose, Rifle and across Delta County. If you are somewhere nearby, send a quote request and tell us where the home is. You can see the full list on our service areas page, and we also handle exterior painting.
Tell us about the rooms, the walls and what you want changed. Palafox Construction will come back with a clear quote.
/filters:strip_exif()/filters:no_upscale()/media/5aa8fd38-e081-4dfc-ace0-ad8203a98c90.jpeg)
/filters:strip_exif()/filters:no_upscale()/media/4a21c05a-8fc1-431b-bd12-2d43b0253465.jpeg)
/filters:strip_exif()/filters:no_upscale()/media/6c59364d-015f-4666-a803-456ff401f532.jpeg)